Dry wear behavior of cooling-slope-cast hypoeutectic aluminum alloy

Abstract

This study investigated the effect of use of a cooling slope on the microstructure, hardness and wear behavior of Al-7Si-Mg alloy. The Al-7Si-Mg alloy was cast with and without a cooling slope at a pouring temperature of 6408C. Examination with optical and electron microscopes showed that the microstructure of cast samples using the cooling slope comprised fine and globular primary a-Al phase with homogeneous distribution of eutectic phase, while conventionally cast samples featured coarse and dendritic primary a-Al phase. The wear resistance of the cast sample was significantly better with cooling slope casting. The wear mechanism was found to be a combination of adhesion, delamination, oxidation and abrasive wear for both cooling slope- and conventionally cast samples. The wear mechanisms of cast samples both with and without cooling slope are similar and follow Archard's law. The cooling slopecast samples with fine and globular ?-Al phase, high hardness and low specific wear rate (K') showed the highest wear resistance of 10.08 � 10-5 mm3 N-1 m-1. � Carl Hanser Verlag GmbH & Co. KG.