Friction stir processed of 6061-t6 aluminum alloy reinforced with silica from rice husk ash
| dc.contributor.author | Zuhailawati H. | en_US |
| dc.contributor.author | Halmy M.N. | en_US |
| dc.contributor.author | Almanar I.P. | en_US |
| dc.contributor.author | Dhindaw B.K. | en_US |
| dc.date.accessioned | 2025-02-17T05:11:10Z | |
| dc.date.issued | 2014 | |
| dc.description.abstract | This paper presents a development of a composite using friction stir process of AA606-T6 aluminum alloy reinforced with amorphous silica obtained from rice husk ash. The amorphous silica was produced after acid leaching and calcinations at 500�C. The silica powder was placed into a groove that was made in the joining line of AA606-T6 plates prior to friction stir process. Hard silica particles restricted the grain growth of aluminum matrix that contributed to a slight increase in hardness. Hardness decreases in zones under the tool was observed because AA6061-T6 alloy was sensitive to friction heat generated by the tool. Ageing at 200�C increased the hardness of the aluminum in the friction stir process zones. � (2014) Trans Tech Publications, Switzerland. | en_US |
| dc.identifier.citation | 2 | en_US |
| dc.identifier.uri | http://dx.doi.org/4028/www.scientific.net/AMR.1024.227 | |
| dc.identifier.uri | https://idr.iitbbs.ac.in/handle/2008/642 | |
| dc.language.iso | en | en_US |
| dc.subject | Al 6061-t6 | en_US |
| dc.subject | Amorphous silica | en_US |
| dc.subject | Friction stir process | en_US |
| dc.subject | Rice husk ash | en_US |
| dc.title | Friction stir processed of 6061-t6 aluminum alloy reinforced with silica from rice husk ash | en_US |
| dc.type | Conference Paper | en_US |