Synthesis, Characterization, and Studies of the Properties of Low-Cost Eco-friendly Hydrophobic Coating on Magnesium Alloy
| dc.contributor.author | Barai B.; Ojha A.; Boorgula K.; Sarkar S.; Mandal T.; Oraon B. | en_US |
| dc.date.accessioned | 2025-02-17T11:19:00Z | |
| dc.date.issued | 2024 | |
| dc.description.abstract | The hydrophobic coating was applied on a Magnesium alloy substrate by a stearic acid coating, which is less harmful to the environment. The coating was done at a fixed temperature of 90��C for one hour, two hours, and three hours, respectively. The hydrophobicity was studied by contact angle test. The maximum attained contact angle was 121�. The response parameter micro-hardness is measured at different coating times. Significant growth in micro-hardness has been observed in the coated sample, particularly with a maximum increase of approximately 35% compared to the bare sample, specifically for the sample coated for three hours. The appearances, surface morphology, and composition were analyzed by surface roughness, SEM, XRD, and EDX. � The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2024. | en_US |
| dc.identifier.citation | 0 | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1007/978-981-97-6875-2_7 | |
| dc.identifier.uri | https://idr.iitbbs.ac.in/handle/2008/5337 | |
| dc.language.iso | en | en_US |
| dc.subject | EDX; Hydrophobic coating; Magnesium alloy; Micro-hardness; SEM; Surface roughness; XRD | en_US |
| dc.title | Synthesis, Characterization, and Studies of the Properties of Low-Cost Eco-friendly Hydrophobic Coating on Magnesium Alloy | en_US |
| dc.type | Book chapter | en_US |