IDR Logo

Please use this identifier to cite or link to this item: http://idr.iitbbs.ac.in/jspui/handle/2008/628
Title: Friction stir processed of 6061-t6 aluminum alloy reinforced with silica from rice husk ash
Authors: Zuhailawati H.
Halmy M.N.
Almanar I.P.
Dhindaw B.K.
Keywords: Al 6061-t6
Amorphous silica
Friction stir process
Rice husk ash
Issue Date: 2014
Citation: 2
Abstract: This paper presents a development of a composite using friction stir process of AA606-T6 aluminum alloy reinforced with amorphous silica obtained from rice husk ash. The amorphous silica was produced after acid leaching and calcinations at 500�C. The silica powder was placed into a groove that was made in the joining line of AA606-T6 plates prior to friction stir process. Hard silica particles restricted the grain growth of aluminum matrix that contributed to a slight increase in hardness. Hardness decreases in zones under the tool was observed because AA6061-T6 alloy was sensitive to friction heat generated by the tool. Ageing at 200�C increased the hardness of the aluminum in the friction stir process zones. � (2014) Trans Tech Publications, Switzerland.
URI: http://dx.doi.org/4028/www.scientific.net/AMR.1024.227
http://10.10.32.48:8080/jspui/handle/2008/628
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.