IDR Logo

Please use this identifier to cite or link to this item: http://idr.iitbbs.ac.in/jspui/handle/2008/41
Title: Design, development, and calibration of octagonal ring type dynamometer with FEA for measurement of drilling thrust and Torque
Authors: Gaikwad S.V.
Mahapatra M.M.
Mulik R.S.
Keywords: Dynamometer
Finite element method
Octagonal ring
Strain gauges
Thrust force
Torque
Issue Date: 2020
Abstract: In this study, the design, development, and calibration of a strain-gauge-based octagonal ring type tool dynamometer was carried out. This dynamometer has the capacity to simultaneously measure thrust and torque during drilling operation. The thin strain ring theory was used for finalizing the dimensions of strain rings. Finite element analysis was carried out to compare theoretical strains with the experimental values and to finalize the location of strain gauges. The thrust force and torque were measured by eight strain gauges, each forming a Wheatstone bridge circuit, converting the deflections of elastic strain rings to proportional electrical signals. A suitable data acquisition system was used for recording the thrust and torque in a computer system. Calibration curves were plotted by applying known thrust and torque repeatedly. It was observed that the designed tool dynamometer is capable of measuring the cutting forces satisfactorily. � 2018 by ASTM International.
URI: http://dx.doi.org/10.1520/JTE20170791
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.