IDR Logo

Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDas A.en_US
dc.contributor.authorPatel S.K.en_US
dc.contributor.authorBiswal B.B.en_US
dc.contributor.authorSahoo N.en_US
dc.contributor.authorPradhan A.en_US
dc.description.abstractThe present study emphasizes on various machinability aspects using different cutting fluids. The effect of cutting fluids on various machining forces, tool flank wear and chip thickness are carried out using the minimal quantity lubrication technique (MQL). This method predicts minimal health risks and economical aspect compared to other techniques. It is experimentally observed that depth of cut and speed was the principal cutting parameter affecting the cutting force and feed force and speed as the principal cutting parameter for the radial force for compressed air and water soluble coolant. Instead, depth of cut, feed and speed were the principal cutting parameters influencing cutting force, feed force and radial force, respectively using nanofluid. In the flank wear analysis, nanofluid performed the best followed by water soluble coolant and compressed air. Finally the mathematical models were developed for the machining forces with 95% confidence level using Minitab 16 which is frequently used for statistical data analysis. ANOVA analysis, Anderson-Darling test and normal probability plot was used to inspect the effectiveness, adequacy, authenticity and statistical significance of the developed model. � 2019en_US
dc.subjectAISI 4340 steelen_US
dc.subjectChip morphologyen_US
dc.subjectFlank wearen_US
dc.subjectMachining forcesen_US
dc.subjectNano fluidsen_US
dc.subjectUncoated cermet insertsen_US
dc.titlePerformance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steelen_US
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.