IDR Logo

Please use this identifier to cite or link to this item:
Title: Fracture behaviour of crept P91 welded sample for different post weld heat treatments condition
Authors: Pandey C.
Mahapatra M.M.
Kumar P.
Sirohi S.
Keywords: Creep
Fracture surface
Issue Date: 2019
Citation: 2
Abstract: In the present research work, P91 steel plates of thickness 18 mm were welded using the shielded metal arc welding process. The welded steel plate subjected to different heat treatment condition including post weld heat treatment (760 �C for 2 h, followed by air cooling) and re-austenitizing (1040 �C for 60 min and air cooled) and tempered (760 �C for 2 h, followed by air cooling). The heat treatments were referred as the PWHT and PWNT. The creep sample was prepared to form the welded and heat treated plate. The creep tests were performed at 620 �C for stresses of 150 and 200 MPa. The weld fusion zone and fine-grained heat affected zone of the crept sample were characterized using the field emission scanning electron microscope (FESEM). The fracture surface morphology of crept sample was also studied using the FESEM. The maximum creep exposure time was measured for the PWNT sample as a result of homogeneous microstructure across the weldments. � 2018
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.