IDR Logo

Please use this identifier to cite or link to this item: http://idr.iitbbs.ac.in/jspui/handle/2008/2211
Title: Characterization of slurry-based mullite coating deposited on P91 steel welds
Authors: Kanwal S.
Thakare J.G.
Pandey C.
Singh I.
Mahapatra M.M.
Keywords: Ceramic
Corrosion
HAZ
Porosity
Slurry coating
Issue Date: 2019
Citation: 1
Abstract: Ceramic coatings are widely used as thermal and environment barrier coatings due to their inert properties and capability to withstand high temperature. Ceramic coatings are commonly deposited by air plasma spray process and electron beam physical vapor deposition. In the present work, a cost-effective, slurry-based dip coating technique was developed to deposit mullite-based ceramic coating on the P91 steel substrate. The coating has been characterized by X-ray diffraction technique and scanning electron microscopy. Sintering of coatings was carried out in the temperature range of 900�1000��C. Sintering time was varied between 0.5 and 1�h. Energy dispersive spectroscopy was carried out to study the distribution and diffusion of constituent elements during high-temperature sintering. Potentiodynamic polarization tests and thermo-gravimetric analysis were performed to investigate the corrosion behavior of the coating. The coating sintered at 1000��C was found to be free from cracks and other microdefects. The corrosion rate of coating sintered at 1000��C was found to be 26.06�mpy whereas the uncoated sample showed a higher corrosion rate of 153.7�mpy. � 2018, Australian Ceramic Society.
URI: http://dx.doi.org/10.1007/s41779-018-0258-4
http://10.10.32.48:8080/jspui/handle/2008/2211
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.