IDR Logo

Please use this identifier to cite or link to this item: http://idr.iitbbs.ac.in/jspui/handle/2008/2187
Title: Characterisation of dissimilar P91 and P92 steel welds joint
Authors: Pandey C.
Mahapatra M.M.
Kumar P.
Keywords: Autogenous-TIG
Charpy toughness
hardness
microstructure
weldments
Issue Date: 2019
Citation: 2
Abstract: In the present study, dissimilar weld joint was prepared using the P91 and P92 steel plate of 8-mm thickness, using the multi-pass gas tungsten arc (GTA) welding with filler (weld 1) and autogenous tungsten inert gas welding (A-TIG) process (weld 2). Evolution of ?-ferrite patches was studied in weld zone and heat affected zone (HAZ) for both weld 1 and weld 2. Effect of varying post weld heat treatment (PWHT) duration was also studied on ?-ferrite patches and mechanical properties of the dissimilar weld joint. PWHT was carried out at 760�C. For weld 2, weld zone showed poor impact toughness and higher peak hardness as compared to weld 1. After the PWHT, a considerable reduction in hardness was obtained for both weld 1 and weld 2,while impact toughness of weld zone showed a continuous increment with PWHT duration. For weldments characterisation, optical microscope, scanning electron microscope (SEM) and microhardness tester were utilised. � 2018, � 2018 Informa UK Limited, trading as Taylor & Francis Group.
URI: http://dx.doi.org/10.1080/09603409.2018.1537168
http://10.10.32.48:8080/jspui/handle/2008/2187
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.