Please use this identifier to cite or link to this item:
|Title:||Mechanical property evaluation of carbon nanotubes reinforced plasma sprayed YSZ-alumina composite coating|
|Abstract:||Yttria (8%) stabilized zirconia (8YSZ)-alumina-carbon nanotube (CNT) composite coatings were deposited using air plasma spray (APS) technique. Three zirconia alumina (ZA) composite coatings, without CNT reinforcement, and with 1%CNT, 3%CNT reinforcement were deposited using identical process parameters (500 A and 66 V). Indentation method was used to characterize mechanical behavior of coatings. The CNT reinforced composite coating showed superior mechanical properties as compared to the conventional 8YSZ coating. The addition of alumina and 1%CNTs increased the Young's modulus by around 25% and 40%, respectively. However, the increase in CNT content decreased the Young's modulus as a result of CNT agglomeration. The hardness, fracture toughness increased with addition of alumina and CNT. The fracture toughness increased from 0.55 � 0.26 MPa m1/2 for 8YSZ to 1.76 � 0.65 MPa m1/2 for 17%alumina-3%CNT reinforcement due to various toughening mechanisms like crack deflection, bridging etc. The maximum displacement of indenter was found to decrease from ~ 176 nm for conventional YSZ coating to ~ 120 nm for 3% CNT reinforced coating. The surface roughness (Ra) was found to be decrease with alumina addition and CNT reinforced coating. The CNT reinforced coating showed surface roughness of around 6 �m. Scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) was used to characterize the coating microstructure and elemental composition respectively. � 2018 Elsevier Ltd and Techna Group S.r.l.|
|Appears in Collections:||Research Publications|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.