IDR Logo

Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMohapatro S.en_US
dc.contributor.authorRajanikanth B.S.en_US
dc.description.abstractThis paper reports plasma treatment of a 5 HP stationary diesel engine exhaust at full flow-rate (approximately 387 l/min) energized by power frequency AC. Glass and Chlorinated Polyvinyl Chloride (CPVC) tubes were used as the dielectric barriers. Significant removal of NO and NOx has been achieved with barrier discharge plasma. The reactors were specially fabricated to facilitate high flow and high temperature associated with the engine exhaust. Among two type of reactor observed the CPVC reactor was energy efficient compared to glass reactor with the application of HVAC. Studies were aimed at online cleaning of oxides of nitrogen from the exhaust without using any conventional catalysts/ adsorbents. The studies indicate that there is a possibility of retrofitting the stationary diesel-generator set with non-thermal plasma reactor for significant control of NO/NOx instead of resorting to conventional adsorbent based removal techniques. The results were discussed in detail for the cases studied.en_US
dc.subjectDiesel engine exhausten_US
dc.subjectElectric discharge plasmaen_US
dc.subjectNox removalen_US
dc.subjectOnline treatmenten_US
dc.titleOnline nox removal from stationary diesel engine exhaust by barrier discharge plasmaen_US
Appears in Collections:Research Publications

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.